Tony Iommi Pickups Magnum 4 and hyperflux 5 & Guitar Roller Nut – Les Paul Junior Double Cutaway Kit Update
Tony Iommi Pickups by John Birch – Amazing Upgrade
Tony Iommi Pickups were one of the few pickup’s types missing to my arsenal of guitars. If you remember my previous article about my last build, I had installed Tonerider Rebel 90 pickups on it.
Everything was fine, and the beauty just sounded perfect. The only problem was, my SG equipped with neodymium Entwistle pickups have the same sound when set to split mode. Considering the SG has a Gibson scale and sports the same tremolo, it was a duplicate.
Why upgrading a brand new built?
Even if I look like a crazy shopaholic guitar collector, I’m not. I know I have way too many guitars, but still, each and every one of them is unique and sounds different from the other 19. I spend my time trying new mods on my test strat to make them as different as possible. I had probably rebuilt each of them 3 or 4 times already.
The Les Paul Junior Double Cutaway Kit was,… Continue reading
Electric Guitar Kit
This article is about my latest build. A Les Paul Junior Double Cutaway Kit featuring two ToneRider Rebel 90 pickups and an Artec BCU.
The BCU is a Band Control Unit onboard frequency booster that I already reviewed on two different guitars in this article. Check it out if you want to have a deeper test of this unit.
The Les Paul Junior Double Cutaway Kit
I bought this kit on AliExpress for the small price of $179, shipping included.
The regular Les Paul Junior Double Cutaway Kit features only one P90 pickup routing, an Adjustable Wraparound Bridge, and a tiny cavity for two potentiometers only. A Volume and a Tone pot.
I knew before ordering that I’d be installing a Stetsbar tremolo that requires a Tune-o-Matic support (4 holes), two humbuckers and a four potentiometer electronic with a 3 position Metric Toggle Switch.
So, before ordering, I contacted the seller to know if he could do those mods for me and at what cost.
About AliExpress… Continue reading
Red Special Wiring Plan – The Best and Easiest Wirework
The Red Special Wiring is a popular pattern. It has been popularized by Brian May on his famous Red Special handmade guitar. I don’t think he invented it, out of phase pickups were famous in the 50s, but he is the first one to have used it massively in rock. Well, at least the first well-known artist.
Is it because of a lack od knowledge or because the On-On-On toggle switch didn’t exist at that time? Whatever the reason was, Brian May used 6 ON-ON slide switch to achieve it. Because of that, today most people doing this wiring are doing it the old way.
The six toggle switch wiring is more complicated to perform, cost more money, require a heavier pickguard modification and is a PITA to run.
The switch needed to assemble the Red Special wiring using only three switches are 3, three positions double pole (DP3T) ON/ON/ON toggle switch.
Also, because I’m a gear geek, I am… Continue reading
Guitar Tone Controls PTB Control Mod The best alternative
I made this guitar for a friend of mine. It is a Les Paul guitar type, but with a bolt on neck.
Since I had two BC Ritch humbuckers sporting two conductor wires only, I decided to use them as they are and to test all the possible mods you can do with such pups.
I could have modified them easily into four wire pickups, but doing that requires to wax them back again to avoid microphony issues. I could have wax them too, but since my friend is a drummer, he doesn’t need tons of fancy mods.
The only mods you can do with two conductor humbuckers are:
Out of Phase and master series.
The electronic have two push-pull potentiometers with an independent volume wiring. The two tone pots are the famous PTB Tone Control.
The neck pickup volume sets pickups out of phase, and the bridge volume is a master series.
The two bands EQ is very effective, especially… Continue reading