Tony Iommi Pickups Magnum 4 and hyperflux 5 & Guitar Roller Nut – Les Paul Junior Double Cutaway Kit Update
Tony Iommi Pickups by John Birch – Amazing Upgrade
Tony Iommi Pickups were one of the few pickup’s types missing to my arsenal of guitars. If you remember my previous article about my last build, I had installed Tonerider Rebel 90 pickups on it.
Everything was fine, and the beauty just sounded perfect. The only problem was, my SG equipped with neodymium Entwistle pickups have the same sound when set to split mode. Considering the SG has a Gibson scale and sports the same tremolo, it was a duplicate.
Why upgrading a brand new built?
Even if I look like a crazy shopaholic guitar collector, I’m not. I know I have way too many guitars, but still, each and every one of them is unique and sounds different from the other 19. I spend my time trying new mods on my test strat to make them as different as possible. I had probably rebuilt each of them 3 or 4 times already.
The Les Paul Junior Double Cutaway Kit was,… Continue reading
Electric Guitar Kit
This article is about my latest build. A Les Paul Junior Double Cutaway Kit featuring two ToneRider Rebel 90 pickups and an Artec BCU.
The BCU is a Band Control Unit onboard frequency booster that I already reviewed on two different guitars in this article. Check it out if you want to have a deeper test of this unit.
The Les Paul Junior Double Cutaway Kit
I bought this kit on AliExpress for the small price of $179, shipping included.
The regular Les Paul Junior Double Cutaway Kit features only one P90 pickup routing, an Adjustable Wraparound Bridge, and a tiny cavity for two potentiometers only. A Volume and a Tone pot.
I knew before ordering that I’d be installing a Stetsbar tremolo that requires a Tune-o-Matic support (4 holes), two humbuckers and a four potentiometer electronic with a 3 position Metric Toggle Switch.
So, before ordering, I contacted the seller to know if he could do those mods for me and at what cost.
About AliExpress… Continue reading
This article covers the advanced Jimmy Page wiring
I made this custom electronic for the SG kit project using Entwistle HVN Vintage Humbucker Pickups.
This article is the fifth and last one of the SG Kit Project series
- In the first video, I glued the neck and painted the guitar.
- In the second video, I applied nitrocellulose varnish.
- In the third video, I created and implemented a waterslide decal logo.
- In the fourth video, I set the neck, the stetsbar tremolo, and the guitar intonation.
A quick update concerning the issue I had with the intonation setting in the previews video.
I had to reverse the saddles of the low E string and the G and B strings. The issue was certainly due because the kit wasn’t well made. When you buy a DIY guitar pack, a number must be penciled on the neck and in the neck slot, to prove that both pieces have been made to fit together. It was not the case with that one.
Also, the… Continue reading
Setting up Stetsbar Tremolo and guitar’s intonation
This article is the fourth one of the series “how to build your guitar kit”.
A stetsbar tremolo is one of the two systems available for a tune-o-matic guitar type. The other one being a Bigsby. The Stetsbar is simple to install. It needs no modification and delivers more advanced performance than a Bigsby.
Bigsby tremolo is a thing of the past. Some people are hooked on vintage gears due to nostalgia or fame. Because that gear was used by superstars, and became a myth over time. Most of the vintage parts are just old, ineffective, unprecise and noisy. They are nowhere near today’s gears. Hendrix and alike would have been baffled by today’s instruments. They would have thrown out of the window their vintage material to grab the ones of today in a blink of an eye.
A stetsbar tremolo is simple to install. You only have to remove the tune-o-matic bridge and place the Stetsbar block on the four washers. You… Continue reading